The temperature in the drying channel of the egg tray machine can usually reach 105-200 degrees Celsius. No matter which drying equipment is selected, the equipment itself is required to have a good insulation layer to prevent heat loss, and the structure of the equipment should be able to ensure that the temperature of the internal components is uniform.
There are currently two main methods for obtaining hot air. One is to directly generate hot air by burning in a hot air furnace. The other is to use steam to generate hot air through heat exchange and air heat exchange. Hot air is used as a drying medium in the drying channel, and the heat source can be coal, fuel oil or natural gas.
Therefore, to ensure the quality of egg tray production equipment, special attention should be paid to raw materials at this time. Only by ensuring the quality and safety of raw materials can you finally get the product and make full use of them. Most people do not guarantee the safety of raw materials, which may lead to unqualified overall quality.
It is necessary to pay extra attention to that since the egg tray will shape the pulp, the pulp will be adsorbed in the pulp tank, and the egg tray will be dirty with pulp around it. These need to be cleaned in time, not only to ensure that the egg tray machine is clean, but also to wear the machine if there is too much accumulated pulp residue.
When cleaning the egg tray machine, please avoid using hard steel wool, chemical rubbing or steel brush polishing, please use a soft towel, soft cloth to wipe with water or use a neutral detergent, otherwise it will cause scratches or corrosion. The egg tray equipment is made of stainless steel, and under normal circumstances, the egg tray equipment will not rust.
However, if it is used or maintained improperly, or the environment of the carding machine is too poor, the carding machine may rust. It is necessary to improve the maintenance awareness of the egg tray machine and do a good job of maintenance. Improper use of the carding machine will cause rust and degumming. Attention should be paid to the correct use method to prevent the occurrence of these two phenomena.
